Tiiwee TWPIR03 Bedienungsanleitung Seite 4

IMPORTANT: The Infrared detector is sensitive to a human's vertical
movement. It is less sensitive to horizontal movements. Therefore, it is
advised to aim the device at a 90 degrees' angle to a person's walking
direction.
Connecting the PIR Sensors to a Siren host
This PIR sensor is compatible with the Tiiwee Home Alarm System.
Connect it wirelessly with one of the 433 MHz Alarm Units.
IMPORTANT: The instructions for pairing the PIR sensor with the Tiiwee
Home Alarm System are included with the Siren hosts or can be
consulted on our website www.tiiwee.com or one of our Youtube
channels.
Test
1. Now, walk or move in front of the PIR sensor at a distance between 6
and 12 meters depending on the personal setting.
2. The Indicator light should light up once (only if the setting is "indicator
light on") and a signal on the alarm unit should be heard (chime or siren
depending on the settings of the alarm unit). Note the 5 second delay
between 2 signals. This is normal and intentional to save battery power.
3. If needed, adjust the detector angle to get the desired detection range.
When the detector LED flashes
(only available when the indicator light is set to "on")
•
LED flashes once: A signal is detected, and the detector sends a
signal to the Alarm unit
•
LED flashes 3 times: Low-voltage indication, please change to the
battery as soon as possible.