2GO Twin BT3 Bedienungsanleitung Seite 9

Upon first use please fully charge the headset. This will take about 2
hours. Please charge the headset in time to extend the battery life.
(If the headset has not been used for a longer period or the battery is
completely discharged it will take some minutes until the charging
indicator will work)
Charging the Charging-box
Connect the included Micro-USB cable with
the charging port of the box and with an
USB-Charger or PC.
Note 1: Check the charging device is suit to the headset.
Note 2: Use only the supplied charger to charge the headset.
Note 3: Do not attempt to open the built-in battery forcibly as this
could damage the headset.
Note 4: If left unused, a fully charged headset will lose its power
automatically. It is recommended to charge the headset each
three months.
Note 5: Do not leave the headset in a too hot or too cold surrounding.
Obey the validation for this product or the maintenance
condition (best between -20℃and 60℃) which may affect the
headset's operations although it is fully charged.
Note 6: Do not dispose the headset to fire or water.
Turning ON the Headset
 Method 1: In OFF MODE, press and hold MFB for 3 seconds to
turn on.
 Method 2: Pick up the headsets from the charging base to turn on
automatically.
Turning OFF the Headset
 Method 1: In ON MODE, press and hold MFB for 5 seconds to turn
off.
 Method 2: Put them back and close the charging base to turn off
automatically.
Pairing the headset with a phone
 Make sure the headset is in OFF-mode and the distance between
the phone and the headset is no more than one meter. Activate the
Bluetooth-function on your phone then.
Method 1
Pick up the two headsets from the charging base to power on

and waiting for 10 seconds , the two headsets will enter auto-
pairing mode.
The two headsets connect with each other after few seconds, the

headset (R) alternately flashing red and blue, and then open the
phone's bluetooth device to search.
 Choose „2GO BT3" to connect your devices with each other.
Micro-USB
port