2GO Twin BT3 Bedienungsanleitung Seite 10

Method 2:
 In OFF-mode, press MFB key for 3 seconds to power on and
waiting for 10 seconds , the two headsets will enter auto-pairing
mode. The two headsets connect with each other after few
seconds, the headset (R) alternately flashing red and blue, and
then open the phone's bluetooth device to search
 Choose „2GO BT3" to connect your devices with each other.
Note : If the connection between the phone and the headset will be
lost, it will reconnect automatically when both are in operation
range again.
Answering a call
In standby-mode, you can answer the call by shortly pressing MFB of the
headset(R) or answering the call on your phone directly.
Ending a call
In call-mode, you can end the call by shortly press MFB of the headset(R)
or ending the call on your phone directly.
Rejecting a call
Press and hold MFB of headset(R) for 2 seconds to reject the call, the
speaker prompts "beep" twice and "call reject".
Re-Dial
In standby-mode or music playing-mode, shortly press MFB twice to
redial the last phone number. The speaker prompts "beep" twice and
"redial".
Music Play/Pause
In standby-mode, shortly press MFB to play music.
On music playing-mode, shortly press MFB to PLAY music, press
MFB again to PAUSE music.
Resetting the Headset
On OFF MODE, press MFB button for 10 seconds :
OFF MODE→ON MODE(2 seconds)→Turn off with indicator flashing
red for 4 times(5 seconds)→Delete pairing Record(10 seconds) , until
hearing the Beep voice for 3 times, and the red/blue light flashes twice
at the same time.
Maintenance
 Do not use abrasive cleaning solvents to clean the headset.
 Do not allow the headset to touch with any sharp objects as this will
cause scratching and damage
 Please keep the headset away from high-temperature, humidity
and dust.