Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
power tool before making any adjustments, changing accessories, or storing
power tools. Such preventive safety measures reduce the risk of starting the
power tool accidentally.
d.
Store idle power tools out of the reach of children and do not allow persons
unfamiliar with the power tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained users.
e.
Maintain power tools. Check for misalignment or binding of moving parts,
breakage of parts and any other condition that may affect the power tools ope-
ration. If damaged, have the power tool repaired before use. Many accidents
are caused by poorly maintained power tools.
f.
Keep cutting tools sharp and clean.Properly maintained cutting tools with
sharp cutting edges are less likely to bind and are easier to control.
g.
Use the power tool, accessories and tool bits etc. in accordance with these
instructions, taking into account the working conditions and the work to be
performed. Use of the power tool for operations dierent from intended could
result in a hazardous situation.
5) Service
a.
Have your power tool serviced by qualified repair person using only identical
replacement parts. This will ensure that the safety of the power tool is main-
tained.
NOISE/VIBRATION INFORMATION
Measured sound values determined according to EN 60745-1.
Wear hearing protection!
Vibration total values (triax vector sum) determined according to EN 60745-1:
The vibration emission level given in this information sheet has been measured in
accordance with a standardized test given in EN 60745-1 and may be used to
compare one tool with another. It may be used for a preliminary assessment of
exposure. The declared vibration emission level represents the main applications
of the tool. However if the tool is used for dierent applications, with dierent acces-
sories or poorly maintained, the vibration emission may dier. This may signicantly
increase the exposure level over the total working period. An estimation of the le-
vel of exposure to vibration should also take into account the times when the tool is
switched o or when it is running but not actually doing the job. This may signicantly
reduce the exposure level over the total working period. Identify additional safety
measures to protect the operator from the eects of vibration such as: maintain the
tool and the accessories, keep the hands warm, organization of work patterns.
180321_ayce_Multi-Tauchsäge_IM_rz.indd 81
80
81
21.03.18 13:31
Werbung
Inhaltsverzeichnis
