Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
of their safety.
15. Do not bring your hands in the cutting area and the saw blade.
16. Keep in mind that even a worn saw blade is still very sharp. Always grasp the
saw blade on the sides. Do not ing the saw blade and do not drop it.
17. Never use the circular saw with grinding wheels.
18. Do not grip underneath the workpiece. The protective cover cannot protect you
from the saw blade under the workpiece.
19. Adjust the cutting depth to the thickness of the workpiece. It should be visible
less than a full tooth height under the workpiece.
20. Do not cut very small workpieces. When cutting round wood, use a device
which secures the workpiece from twisting. Never hold the workpiece to be
cut in your hand or across your leg. Secure the workpiece to a sable platform.
It is important to secure the workpiece properly to minimize the risk of physi-
cal contact, jamming of the saw blade or loss of control.
21. When cutting longitudinally, always use the parallel stop or a straight edge
guide. This improves the cutting accuracy and reduces the possibility that the
saw blade gest jammed.
22. Use always saw blades in the correct size and with suitable locating bore (Dia-
mond versus round). Saw blades that do not match the mounting parts of the
saw will run unevenly and lead to loss of control.
23. Never use a damaged clamping screw. The outer ange and the clamping
screw have been specially designed for your saw for optimum performance
and reliability.
24. Start the circular saw and begin cutting when it reaches the full idling speed.
25. Never brake the saw blade using lateral pressure after switching it o.
26. Set the saw aside only when the saw blade comes to a standstill.
27. Do not expose the saw to high temperatures, humidity and strong shocks.
The saw can be damaged as a result.
180321_ayce_Multi-Tauchsäge_IM_rz.indd 77
76
77
21.03.18 13:31
Werbung
Inhaltsverzeichnis
