Herunterladen Diese Seite drucken

Omnitronic SHS-1 Bedienungsanleitung Seite 2

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

SHS-1 Sports Headset
Introduction
The SHS-1 is a professional headset microphone designed for fitness
instructors and other handsfree speech applications. The condenser
capsule offers speech intelligibility and high sound quality. The cardioid
pickup pattern ensures problem-free use with high ambient noise
suppression. The microphone capsule and the boom are protected from
moisture by plastic injection. The moisture shield on the boom repels
sweat and water. The supplied windscreen makes the microphone less
susceptible to pop, breathing and wind noise.
Getting started
Place the headband around the back of the head, with the boom on the
left side. Place the microphone at the side of the mouth. To decrease pop
noise, avoid placing the microphone directly in front of the mouth. Plug
the mini XLR connector on the microphone cable into the input jack on
your bodypack transmitter. The SHS-1 is a condenser microphone and
therefore needs a power supply. If excessive wind or pop noise becomes
audible, attach the supplied windscreen to the microphone.
Care
The headset microphone is maintenance-free, except for occasional
cleaning. You can use a slightly dampened cloth for cleaning. Do not
remove the moisture shield.
Specifications
Type:
Directivity pattern:
Frequency response:
Sensitivity:
Impedance:
Power supply:
Current consumption:
Connection:
Pin configuration:
Cable length:
Operating temperature:
Dimensions:
Weight:
Subject to change.
Protecting the environment
When to be definitively put out of operation, take the product
to a local recycling plant for a disposal which is not harmful
to the environment. Devices marked with this symbol must
not be disposed of as household waste. Contact your retailer or
local authorities for more information. Remove any inserted
batteries and dispose of them separately from the
Condenser
Cardioid
20-18000 Hz
-41 dB (± 3 dB)
1.5 kΩ (± 30 %)
1.5-10 V DC via bodypack
approx. 0.5 mA
3-pin mini XLR plug
1 = ground, 2 = audio signal,
3 = power supply
approx. 1.6 m
-5°C - +45°C
130 mm ø
22 g (w/o cable)
No. 13056041

Werbung

loading