Storage,Packagingandtransportation - Schaudt LT 45X Series Montageanleitung

Installation Instructions Operator and control panel LT 45X
E
6
Touch the sensor for the main 12V ON/OFF switch
"
The green indicator LED lights up.
F
The 12V leisure area supply is switched on.
F
5.3 Effecting a shutdown
ATTENTION!
Y
Once the production of the vehicle is complete, the system MUST be
shut down.
12V supply must be switched off.
"
Disconnect the leisure area battery from the 12V on-boardsupply; to do
"
this:
Disable the battery cut-offswitch of the relevant power supply
"
or
Disconnect the battery terminals (depending on power supply)
"
Also refer to the operatingmanual for the relevant power supply (EBL ... /
Y
CSV ...)
6 Storage, packaging and transportation
Only transport and store the LT 45X control panel if the packing is suitable
and ambient conditions are dry.
No part of this manual may be reproduced, translated or copied without ex-
press written permission.
Date: 12.07.2018 9310330 MA /EN