Kindermann Klick & Show K-10S Installations- Und Benutzerhandbuch Seite 48

Um mit drahtlosen Mobilgeräten zu arbeiten, müssen diese Ports für die Kommunikation über Ihre Firewall
geöffnet sein:
Von
PC:Port is assigned by
windows/MAC;
Transmitter-Port
is assigned by system
PC:Port is assigned by
windows/MAC;
Transmitter-Port
is assigned by system
PC:Port is assigned by
windows/MAC;
Transmitter-Port
is assigned by system
PC:Port is assigned by
windows/MAC;
Transmitter-Port
is assigned by system
PC:Port is assigned by
windows/MAC;
Transmitter-Port
is assigned by system
PC:Port is assigned by
windows/MAC;
Transmitter-Port
is assigned by system
PC:Port is assigned by
windows/MAC;
Transmitter-Port
is assigned by system
Transmitter-Port
is 80/8080
Any telnet client
Any client
Apple device
Inhaltsverzeichnis
Nach Protokoll Richtung

port is 20000 TCP

port is 20002 TCP

port is 20003 TCP

port is 20005 UDP

port is 8887 Multi cast
WMB, port is

Broadcast
8889

port is 6667 UDP
remote OTA
server

HTTP
port is
8080/80

port is 23 Telnet

port is 5656 TCP

port is 5353 Multi cast
Typ Beschreibung
Transfer control command between Transmitter/PC software and
Command
Base-unit
Video Transfer video from Transmitter /PC software to Base-unit
Audio Transfer audio from Transmitter /PC software to Base-unit
Preview window Transfer preview video from Transmitter /PC to Base-unit
Fast cursor Transfer cursor from Transmitter /PC to Base-unit
Command Transfer command between Transmitter /PC software and Base-unit
Used by Transmitter / PC software to send multicast message to
Discovery
network to search Base-unit. The group IP is "239.1.1.1"
Used by Transmitter / PC software to send broadcast message to
Discovery
network to search Base-unit
Discovery After search, authentication message is transferred through this port
communication between Base-unit and remote OTA server. Such as
OTA query firmware info, download new firmware
OTA server:
Send command from telnet client to Base-unit, response result to
Telnet Command telnet client
send info to telnet client
Telnet Command the same as telnet
Airplay For apple device to search Base-unit
http://www.fw-service.com
48