Activate / Deactivate The Alarm; Displaying The Set Alarm Time; Snooze Function; Operation - Telefunken R900 Bedienungsanleitung

5.2

activate / deactivate the alarm

When the appliance is in standby mode (current clock time
„
display mode), you can activate or deactivate the alarm. By
pressing
until the alarm indicators 1 (8/9) or 2 (10/11) lights up or goes
off.
The alarm indicators 1 (8/9) or 2 (10/11) will light up on the
„
display (12) to indicate an alarm is activated.
5.3

Displaying the set alarm time

When the appliance is in standby mode (
„
(5) button for Alarm 1 or
The set alarm time is displayed for approximately 5 seconds
„
before the clock returns to current clock display mode.
The indication for Alarm 1 or Alarm 2 stays lit when an alarm is
„
activated.
Note: If you display the set alarm time by pressing
„
or (6) button, you must press the relevant button one or two
times to returns to current clock time display mode. This will
deactivate the alarm.
5.4

snooze function

When the alarm has started (Buzzer or Radio), the snooze
„
function can be activated by pressing the sNooZE/sLEEP/
DIMMER (7) button.
The alarm1 (8/9) or 2 (10/11) indications starts flashing on the
„
display. The alarm stops and starts automatically again after 9
minutes. The alarm can be switched off several times.
To cancel the Snooze function, press the
„
Note that the alarm remains set and will be activated again
„
according to your alarm setting (
6.

oPERaTIoN

6.1

switching appliance on / switching to standby mode

In standby mode (current clock time display mode), press once
„
the
Press the
„
mode (current clock time display mode).
(5) button for Alarm 1 or
(1) button to turn on the radio mode.
(1) button again to return the unit to the standby
31
(6) button for Alarm 2
Operation), press
(6) button for Alarm 2.
(1) button.
Setting the alarm).
(5) button
EN