Adjusting Brightness Of Display; Setting The Volume Level; Alarm; Setting The Alarm - Telefunken R900 Bedienungsanleitung

Note: If no buttons are pressed within approximately 20
seconds, the clock returns automatically to the normal display
mode. The changes made are saved.
4.2

adjusting brightness of display

When the appliance is in standby mode (clock time display
„
mode) (
DIMMER (7) button to select different brightness levels of the
display. Choose between 2 preset brightness levels.
4.3

setting the volume level

Set the volume (from 00 to 15 ) when using the FM radio mode.
„
button
(6)
(5)
Note: Press and hold (5) / (6) for fast movement.
5.

aLaRM

With this clock radio, 2 different alarms can be set.
„
5.1

setting the alarm

Press the
„
(clock time display mode).
Press and hold the
„
alarm time will flash on the display (12).
Set the hours by pressing the
„
Set the minutes by pressing the
„
To toggle between Buzzer and Radio alarm mode, press the
„
(5) button until the desired option is lighted up on the LED
display (12).
Operation), press repeatedly the sNooZE / sLEEP /
Description
higher volume
lower volume
(1) button to turn the radio off to standby mode
(5) button for about 2 seconds. The set
29
(3) button.
(4) button.
EN