Block Diagram; Configuration / Operating The Function Keys; Further Explanations - Morsettitalia 884114 Bedienungsanleitung

BloCk Diagram

Safety
40
2-wire transmitter
Documentation for routing diagram.
Current
in general:
Voltage
When configuring the 884114, you will be guided through all parameters and
Potentiometer
you can choose the settings which fit the application. For each menu there is
a scrolling help text which is automatically shown in line 3 on the display.
Configuration is carried out by using the 3 function keys:
1
2
3
When configuration is completed, the dispaly will return to the default state 1.0.
Pressing and holding
state (1.0) without saving the changed values or parameters.
If no key is activated for 1 minute, the display will return to the default state
(1.0) without saving the changed values or parameters.

Further explanations:

Password protection: Programming access can be blocked by assigning a
password. The password is saved in the transmitter in order to ensure a high
degree of protection against unauthorised modifications to the configuration.
Default password 2008 allows acces to all configuration menus.
ConFiguraTion /
oPeraTing THe FunCTion keYs
will increase the numerical value or choose the next parameter
will decrease the numerical value or choose the previous parameter
will accept the chosen value and proceed to the next menu
will return to the previous menu or return to the default
3
41