Ecoroute Hd Instructions - Garmin ecoRoute HD Bedienungsanleitung

ecoRoute HD Instructions

The ecoRoute HD device connects
to your vehicle's OBD II (On-Board
Diagnostics) connector. The ecoRoute
HD device records vehicle data
and wirelessly sends the data to a
compatible Garmin GPS device.
For complete information on using
the ecoRoute HD device with your
GPS device, refer to the ecoRoute HD
Supplement found at www.garmin.com.
Updating Your GPS Device
Software
Before using the ecoRoute HD device
with your GPS device, you may need to
update the GPS device software.
1. Go to www.garmin.com, and click
Support > Software.
2. Follow the on-screen instructions to
update the software for your GPS
device.
For specific information about updating
your GPS device, refer to the owner's
manual for your GPS device found at
www.garmin.com.
Locating the OBD II
Connector
WARnInG
‹
If your vehicle's OBD II connector is in
close proximity to the vehicle's pedals,
to avoid the risk of pedal interference,
do not install the ecoRoute HD device
in your vehicle. Return the product to
the place of purchase within 7 days of
purchase for a refund.
The location of the OBD II connector
varies for each vehicle. For the best
view of the connector, open the driver
door and kneel.
Search the Internet for images that show
where the OBD II connector is located
in your vehicle. The following are
common locations in which to look for
the OBD II
connector:
3
OBD II Connector