Geutebruck G-Lite series Installation Seite 20

Quick set-up instructions
Optional: Adjust Beam Angle of Illuminators –
Changing the Lens Insert
1. Remove base plates of one or both illuminators. Factory default angle = 35°. To
alter to 10 degree – remove lens insert altogether. To alter to other angles –
insert alternate lens insert with required angle identified. Illuminator supplied with
35 degree lens inserts and 2 x spare lens inserts supplied to provide 60 degree
angle. Other angle inserts available to order. Once inserted, replace base plates
and secure to ensure unit is weatherproof.
Alignment
Position illuminator adjacent to
camera and point towards scene
(Optional night time set-up for
optimum image performance)
Always keep product in same orientation. If the product is to be mounted from above,
please move U-Bracket as shown. Holes are provided for this purpose
Lens Insert
Adjust vertical angle using U bracket
attached to base
TARGET
diam 8mm
6
51mm
89mm