Chauvet DJ GigBAR Flex Kurzanleitung Seite 7

EN
Wireless Foot-Switch Operation
The included wireless foot-switch provides quick access to preset colors, color-change programs, and
sound-activation through the GigBAR Flex microphone. To use the foot-switch:
1. Connect the GigBAR Flex to power. Turn the wireless foot-switch on.
2. Raise the wireless antennas located on the GigBAR Flex and the foot-switch.
3. Press pedal #1 (Auto) to activate Auto program controls. When working, all the lights will begin in
Auto mode (AM01).
4. Use the chart below to activate the desired function..
P
EDAL
1 x press
2 x press
1
3 x press
(Auto)
4 x press
5 x press
1 x press
2 x press
2
3 x press
(Sound)
4 x press
5 x press
1 x press
2 x press
3 x press
4 x press
3 5 x press
(Color) 6 x press
7 x press
8 x press
9 x press
10 x press
4
N/A
(Blackout)
6
QUICK REFERENCE GUIDE
A
CTION
F
UNCTION
Auto mode Pars, Derby Lights and
strobes (AM01)
AP01
AP02
AK01
APK1
Auto mode Pars, Derby Lights and
strobes (SM01)
SP01
SP02
SK01
SPK1
Red, no strobe
Green, no strobe
Blue, no strobe
UV, no strobe
Yellow, no strobe
Pink, no strobe
Cyan, no strobe
Dark Pink, no strobe
Dark Blue, no strobe
White, no strobe
Immediately turns OFF all the light
fixtures
GigBAR Flex QRG Rev. 1