Cobra SPYBALL 6808-9 Einbauanleitung Seite 18

Procedure:
While the security system is disarmed, turn ignition on, press and hold down
push-button n. 1 of the transmitter about 7 seconds, until the LED lights up,
then release.
of time, press push-button n. 1 again.
confirms the procedure has been entered. The LED switches off shortly, then
it provides five different visual indications that relate to the five selectable
functions. Please refer to the chart below:
VISUAL
INDICATION
1 flash
2 flashes
3 flashes
4 flashes
5 flashes
SPYBALL 6808-9/6828-9 ENGLISH
The LED remains on about 3 seconds.
SELECTABLE
FUNCTION
Biker Recognition
Arming and
disarming audible
signals + panic
function
"Turn indicator on"
audible warning
signal
Anti-hijack function Press push-button 1
Polarity of the
instantaneous
alarm trigger input
A short sharp audible signal
TO SELECT
CONFIRMATION
SIGNAL
Press push-button 1
of the transmitter
after the first flash
Three (3) sharp
audible signals
follow
Press push-button 1
of the transmitter
after the second
flash
Three (3) sharp
audible signals
follow
Press push-button 1
of the transmitter
after the third flash
Three (3) sharp
audible signals
follow
of the transmitter
after the fourth flash
Three (3) sharp
audible signals
follow
Press push-button 1
of the transmitter
after the fifth flash
Positive polarity
During this lapse
TO DESELECT
CONFIRMATION
SIGNAL
Press push-button 2
of the transmitter
after the first flash
One (1) sharp
audible signal
follows
Press push-button 2
of the transmitter
after the second
flash
One (1) sharp
audible signal
follows
Press push-button 2
of the transmitter
after the third flash
One (1) sharp
audible signal
follows
Press push-button 2
of the transmitter
after the fourth flash
One (1) sharp
audible signal
follows
Press push-button 2
of the transmitter
after the fifth flash
Negative polarity
18