Troubleshooting - Imperial BAS 6 Benutzerhandbuch

7. TROUBLESHOOTING

Symptom
No sound at a
Bluetooth
connection
No Bluetooth
pairing to a
Bluetooth device
possible
Disconnection or
dropout of mu-
sic playback via
Bluetooth
SD card is not
recognized.
No sound at the
Bluetooth play-
back
Switching on the
BAS 6 not
possible
Possible Cause and Remedy
Paired Bluetooth device not switched on. Volume
set too low
Increase the volume on the BAS 6. Restart the BAS 6.
Pairing mode not active on the device to be con-
nected.
Make sure that the device to be connected is in pair-
ing mode. Only then is it possible to establish a pairing
with the BAS 6.
Distance between both devices too large
Reduce the distance between the two devices and
carry out another Bluetooth scan.
Distance between tablet/smartphone and speaker
too large.
Decrease the distance of the devices.
Tip: the distance should not exceed 10 m.
Formatting of the card might be wrong. Please
format the SD card in FAT 32.
Music file format might not be supported. Please
make sure that the music files are stored in the follow-
ing file types on the SD card: MP3, WMV, WAV, FLAC
Volume level on BAS 6 is too low.
Please increase the volume.
Briefly press the On/Off button if needed.
Battery completely exhausted.
Please connect the speaker to a USB power source to
start the charging process.
37
E
IMPERIAL BAS 6