Charging The Device; Using The Device As A Usb Power Bank - Imperial BAS 6 Benutzerhandbuch

5.7. Charging the Device

If the indicator LED (3) on the speaker flashes red, the internal battery is
depleted and should be charged.
Via USB
To charge the speaker, connect the device with the USB cable included in
the delivery scope to a USB charger or another USB power source.
It is recommended to use a 5 V/ 1 A USB charger. Switch off the device via
the button [2] .
Once a voltage source is connected, the charging process for the internal
battery will start. The indicator LED will permanently light green.
E
Via Solar Panel
The speaker can also be charged via the built-in solar panel.
This allows you to charge the device independently of a power source using
sunlight or another light source.
Switch off the device via the button (2) and point the solar panel towards
the incoming sunlight or another strong light source.
If there is sufficient light, the indicator LED will permanently light green.
If the light intensity is insufficient for charging, the LED will flash green in ra-
pid succession. In this case, change the position of the radio to increase the
incidence of light on the solar panel in order to achieve an ideal charging
result.

5.8. Using the Device as a USB Power Bank

You can use the speaker as a USB power band.
To do this, connect a device that you would like to charge via the
USB port (11).
34
OPERATING MANUAL