Axis M1145 Serie Installationshandbuch Seite 13

AXIS M1145 Series
I/O Connector
Use with external devices in combination with, for example, tampering
alarms, motion detection, event triggering, time lapse recording and alarm
notifications. In addition to the 0 V DC reference point and power (DC
output), the I/O connector provides the interface to:
•
•
SD Card Slot
A microSD card (not included) can be used for local recording with
removable storage. For more information, see Specifications, on page 14.
NOTICE
NOTICE NOTICE
To prevent corruption of recordings, the SD card should be
unmounted before removal. To unmount, go to Setup > System
Options > Storage > SD Card and click Unmount.
Control Button
The control button is used for:
•
•
Digital output – For connecting external devices such as relays
and LEDs. Connected devices can be activated by the VAPIX®
Application Programming Interface, output buttons on the
Live View page or by an Action Rule. The output will show as
active (shown under System Options > Ports & Devices) if
the alarm device is activated.
Digital input – An alarm input for connecting devices that
can toggle between an open and closed circuit, for example:
PIRs, door/window contacts, glass break detectors, etc. When
a signal is received the state changes and the input becomes
active (shown under System Options > Ports & Devices).
Resetting the product to factory default settings. See page 18.
Connecting to an AXIS Video Hosting System service or AXIS
Internet Dynamic DNS Service. For more information about
these services, see the User Manual.
13