Werbung
Verfügbare Sprachen
Verfügbare Sprachen
L Instructions Wireless LAN Router 54 Mbps
Connecting the Wireless LAN Router:
• Keep this device away from heaters and radiators, dust or dampness when being operated.
• Unplug the unit from the power supply before connection.
• Connect the computers, other network devices, hubs/switches to sockets 1-4. Use a crossover or CAT5 patch cable
(max. 100m). The integrated switch automatically identifies the connection speed of 10 or 100Mbps, half/full duplex
transfer mode and the type of cable used.
• Connect the Ethernet port of your modem to the WAN connection on the router. A 1:1 or crossover cable is required
depending on the modem. In most cases, the existing connection cable can be used.
• Plug the power unit supplied into an empty socket and connect it to the router.
Caution: Unsuitable power units can cause damage!
Checking Installation
There are 10 LEDS on the front to display the status:
LED
Status
PWR
Illuminated
Off
WLAN
Flashing
Off
WAN
Illuminated
Flashing
Off
LAN1-4
Illuminated
Flashing
Off
Software configuration
TCP/IP protocol must be installed on all PCs which are to use the internet. By default, the IP address 192.168.2.1 and an
activated DHCP server are configured for the router. That means that the connected PCs are automatically given appro-
priate addresses and other settings. We recommend using these. Select TCP/IP setting Get IP address automatically for
all PCs connected to the router. You can then configure the router using the web browser. The browser must be Java-
capable and the Java function must be activated (e.g. Internet Explorer 5.0 or better, or
Netscape Navigator from version 4.71).
Explanation
Power unit is connected and supplying electricity
No power unit connected, device not being supplied with electricity
The WLAN port has generated a correct network connection
No WLAN device within range or not working
The WAN port has generated a correct network connection
Data transfer via WAN port
No connection
The corresponding LAN port has generated a correct network connection
Data transfer via respective LAN port
No connection
6
Werbung
