SIGLENT TECHNOLOGIES SDG2000X Schnellstart Seite 6

1. Power Key
This key is used to turn on/off the generator. When the power key is off, it is in the power off state.
2. USB Host
The generator supports U-Disk using FAT format. It's used to read waveforms or state files from a U-Disk or store the current state of the instrument to the U-Disk.
Users can update the firmware through U-Disk.
3. Touch Screen Display
The generator has a 4.3 inch TFT-LCD touch screen, which displays current function menu, parameter settings, system state, prompts, etc. It is the most important
display and control center of the instrument. For detailed information, please refer to "Touch Screen Display".
4. Numeric Keyboard
Consists of numbers from 0 to 9, radix points "." and symbol keys "+/-", which are used to input parameters.
Note: To enter a negative number, you need to enter a symbol "-" first.
5. Knob
It is used to increase (clockwise) or decrease (anticlockwise) the current numerical value when setting parameters. It is also used to switch characters in the soft
keyboard when inputting a file name. When saving or reading files, rotate the knob to choose a position to save a file or choose a file to be read; press the knob to
open a selected folder or file.
When choosing Waveforms → Page 1/2 → Arb → Arb Type rotate the knob to select a desired built-in or stored waveform.
6. Arrow Keys
When using knob to set parameters, they are used to select the digit to be modified. When using numeric keyboard to set parameters, the left arrow key is used as
a Backspace function. When inputting a file name, they are used to move the position of cursor.
6