Analysis And Research Of Failures - Tecno-gaz DISTILLER Bedienungsanleitung

PAR 07
N° FAULT
DOESN'T PRODUCE
1
WATER
DOESN'T PRODUCE
ENOUGH DISTILLED
3
WATER DURING THE
CYCLE
LEACK OF WATER AND
4
STEAM FROM THE DRAIN
DDIF051_REV3.doc

ANALYSIS AND RESEARCH OF FAILURES

CAUSE
FEEDING CABLE NOT CONNECTED
TO THE SOCKET OR AT THE BASIS
OF THE MACHINE
RIARMO NON ESEGUITO
YOU HAVEN'T PUT IN WATER
RIGHT TO THE MAX LECVEL
THE GASKET OF THE COVER IS
NOT CORRECTLY PLACED OR
DOESN'T SEAL ENOUGH
THE WATER CONTAINER IS NOT
PLACED UNDER THE DRAINING OF
THE DISTILLER
ACTIVATED COAL FILTERS ARE
NOT PLACED IN THE SPOUT
THE CONTAINER IS NOT
PERFECTLY ALIGNED WITH THE
DISTILLER
20 - 38
INTERVENTION
CORRECTLY CONNECT
THE FEEDING CABLE
PREMERE ILTASTO DI
RIARMO
FILL THE DISTILLER
CORRECTLY
PLACE THE GASKET
CORRECTLY
PLACE THE
CONTAINER
CORRECTLY
REPLACE FILTERS
CORRECTLY
ALIGNE THE
CONTAINER