Installation - Conceptronic CLLMEASYWL Bedienungsanleitung

ENGLISH
3.1 Inserting the batteries
A. Open the battery compartment on the bottom of the mouse.
B. Insert the 2 included AAA batteries in the mouse.
C. Close the battery compartment
3.2 Connecting the USB receiver
A. Turn on your computer.
B. Connect the USB receiver to a free USB port on your computer. The
Activity LED on the receiver will become solid green.
The USB receiver will be recognized and installed automatically. No driver
installation is required.
3.3 Connecting the mouse with the USB receiver
In order to use the mouse, you need to connect the mouse to the USB receiver.
A. Press the 'Connect' button on the USB receiver. The activity LED will
blink green.
Note : The USB receiver will stay in connection mode for 15 seconds. After 15
seconds, the connection mode is ended. If your mouse is not connected
within 15 seconds, press the 'Connect' button again.
B. Press the 'Connect' button on the bottom of the mouse. The activity
LED on the USB receiver will shortly blink fast.

3. Installation

7