Werbung
Verfügbare Sprachen
Verfügbare Sprachen
the extractor is used. Note that grease is deposited in the
extractor when cooking, whether it is switched on or not.
We recommend the use of gloves and caution when cleaning
the inside of the extractor.
Repairs
If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons
in order to avoid a hazard.
Do not switch on the extractor if the supply cord is worn or
has cuts or if there are signs of deterioration around the
control panel.
If the LED module is malfunctioning, it must be replaced by
the manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
If the extractor stops working or functions abnormally,
unplug it from the mains and contact the technical service.
Please contact the nearest Qualified Technical Assistance
Service for any repairs always using original spare parts.
Repairs and modifications carried out by others could
damage the extractor or cause it to malfunction and cause
safety risks.
By pressing the buttons shown in the figure,
you will be able to control the functions of the
extractor.
To achieve better extraction, we recommend
switching on the extractor a few minutes before
starting to cook (3 - 5 minutes) so that the air
flow is continuous and stable when extracting
the fumes.
Likewise, keep the extractor switched on for a
few minutes when cooking is complete to allow
all fumes and odors to be expelled.
16
1- Timer / Clock knob
2- Alarm / Timer key
3- Display
4- Light key
5- On/Off / Speed knob
Werbung
