As An Object Measurement Thermometer - Fora Diamond NEXUS Benutzerhandbuch

NOTE:
• As the forehead measurement temperature is likely
to be affected by sweat, oil and the surroundings,
the reading shall be taken as a reference only.
• If the probe is placed at an angle close to the
forehead measurement, the reading will be affected
by surrounding temperature. Babies' skin reacts
very quickly to the ambient temperature. Therefore,
do not take their temperature with the FORA
Diamond NEXUS thermometer during or after
breastfeeding, because the skin temperature may
then be lower than the internal body temperature.
• If the reading is < 32°C (89.6°F), the display will
show together with red LED and three short beeps.
• If the reading is ≥ 37.5 °C (99.5°F) and < 43°C
(109.4°F), the display will show together with red
LED and ten short beeps.
• The thermometer will automatically turn off if left
idle for 10 seconds.

As an Object Measurement Thermometer

1. Touch Auto-sense Power Switch
for 2 seconds to turn on the
thermometer first.
2. Press the Mode button to
select Object mode.
The temperature unit flashes.
15