Perform The Test; Using The Device; As A Body Measurement Thermometer - Fora Diamond NEXUS Benutzerhandbuch

PERFORM THE TEST

Using the Device

As a Body Measurement Thermometer

14
1. Touch Auto-sense Power Switch
for 2 seconds to turn on the
thermometer first.
2. Press the Mode button to
select Body mode.
The temperature unit flashes.
3. Move the probe close to the
forehead.
Make sure the probe is flat and
close to the forehead, not at
an angle. Perform a forehead
measurement with a distance
within 2 cm. The meter will take
measurement automatically with
the blue LED blinks.
4. Read the result.
The measurement result will be
done in 3 seconds.
The reading is shown together
with green LED and three short
beeps.