Audio Profiles - Yarvik SMP45-210 Anleitung

Yarvik smartphone manual
Click on the discovered Bluetooth device to pair your Yarvik Smartphone with it.
The "Bluetooth pairing request" window will appear:
Most Bluetooth devices require a pin code to connect. This code usually is 0000 or 1234. Please refer to
the instructions manual of your Bluetooth device if the pin code is different.
After you have entered the correct pin code, press "OK".
Your Yarvik Smartphone will now start pairing with your Bluetooth device, and after a few seconds the
connection will be completed, showing a "Connected" message underneath the concerning Bluetooth
device in the "Available Devices" list:
You can connect multiple Bluetooth devices to your Yarvik Smartphone for use at the same time (e.g.
headset and keyboard).
Return to index
4.3

Audio Profiles

Here you can change the audio volume of the Smartphone, like only vibration or vibration and ring
notification for incoming calls/messages.
Return to index
4.4 Display
file:///Volumes/Product_Data/SMP45-210/R&D/HTML%20Manual/manual_en.html[01-02-13 17:06:05]