For Your Safety - Henkel LOCTITE 97144 Bedienungsanleitung

1 Please observe the following
1.4

For Your Safety

Warning- To reduce the risk of injury, user must read and understand the
instruction manual!
Do not operate power tools in explosive atmospheres, such as in the presence of
flammable liquids, gases, or dust.
Do not abuse the cord. Never use the cord to carry the tools or pull the plug from
an outlet. Keep cord away from heat, oil, sharp edges or moving part.
Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep
your hair, clothing, and gloves away from moving parts.
Avoid accidental starting. Be sure switch is off before plugging in.
Remove adjusting keys or switches before turning the tool on.
Use safety equipment. Always wear eye protection.
Disconnect the plug from the power source before making any adjustments,
changing accessories, or storing the tool.
Check for misalignment or binding of moving parts, breakage of parts, and any
other condition that may affect the tools operation. If damaged, have the tool
serviced before using.
Use only accessories that are recommended by the manufacturer for your model.
Only qualified repair personnel must perform tool service.
When servicing a tool, use only identical replacement parts. Follow instructions in
the Maintenance section of this manual.
Observe general safety regulations and manufacturer's instructions for the
handling of chemicals!
If chemical products are not properly handled, damage to health can result!
Request a safety data sheet for the LOCTITE -product used!
®
The rotorspray is not suitable for humidity curing cyanoacrylate adhesives. These
clog the wetting holes of the rotor disk!
The rotor disk must be able to reach the required wetting position exactly without
getting contact with any obstacles!
7