Turn Off Wake-Up Alarm - cyclotest baby Gebrauchsanleitung

Frequently asked questions
If one or two measurements have failed, this is not important. Simply
carry on as normal on the next day. If there are too few measurements
that can be evaluated in a cycle, the unit, to be on the safe side, dis-
plays a longer fertile phase than usual.
Important: With each initial measurement in the cycle you determine
the time window of 4 hours for the daily measurement. You can there-
fore decide anew for each cycle whether you want to stick with the
selected time or opt for a new time.

Turn off wake-up alarm?

If you do not want to be disturbed, e.g. you want to have a lie-in at the
weekend, you can turn off the wake-up alarm. To do so, press the large
round Measurement button once briefly when the unit is switched off.
You will see the following display:
Again press the large round Measurement button once briefly.
To turn the wake-up alarm back on, proceed as described above. The
unit confirms the input with a beep.
EN-71
Fig. no. 26
Wake-up alarm on (more bars)
Fig. no. 27
Wake-up alarm off (fewer bars)