Neat D-POS II Benutzerhandbuch Seite 6

3.2 Connectors
Picture 2. Connector J2 & J4 contacts
# Text
1 +
2 -
J2 3
ANT
4 COM
5
LOOP
6 EXT
7 GND
J4 8 SYNC
9 RELAY
10 RELAY
Table 3. Connectors J2 & J4 functions
* Only one of either a D-POS Antenna OR a LOOP antenna must be connected!
Only use D-POS ANT (NEAT Ferrite Antenna), art#: NE31 07030-01.
3.3 Tamper switch
The unit is equipped with a tamper switch to alert if the unit is
opened.
6
Function
Source power, 10-28V
Source power, Ground
*
A ferrite antenna should be connected between ANT and COM
Common ground for ferrite- and loop antenna
*
A loop should be connected between LOOP and COM
External activation (DOOR magnetic contact depicted as example)
Common ground for SYNC and EXT
Synchronization of D-POS units
Galvanic isolated relay output
Galvanic isolated relay output
DC
D-POS II - NE41 17028-00 v1.0
Sync