Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
lever flap which is just inside the round outlet. To check
this area, remove the collection bag and ensure this area
inside the outlet tube is free of debris and dirt. Operate
the selector lever backwards and forwards to ensure
correct operation.
• Do not hose or submerge any part of the blower vac.
• Do not use solvents to clean the blower vac.
• Store the blower vac in a dry place, and out of reach of children.
Power Cord Maintenance
If the supply cord needs replacing, the task must be car-
ried out by the manufacturer, the manufacturer's
agent, or an authorised service centre in order to avoid
a safety hazard.
Troubleshooting
Attention! Always remove the plug from the
mains socket before starting any work on the
machine.
The machine won't start: Check whether the switch
•
is in the "I" position; check that the residual current
circuit breaker is not switched off and that no fuses
have blown in its electric circuit. If the machine still
won't start have it inspected by an authorised cus-
tomer service firm.
•
The machine won't vacuum: Check whether the
leaf collection bag is full. If it is, empty it; check
whether the lever for the reversing flap is in the cor-
rect position, otherwise have the machine inspected
by an authorised customer service firm.
•
The machine won't blow: Check whether the lever
for the reversing flap is in the correct position, other-
Electric vacuum / blower
Technical Specifications
Rated voltage
Rated frequency
Rated power consumption
Fuse (time lag)
Rotation
Max. blowing speed
High blow volume
Bag volume
Weigth
Protection class II/VDE 0700
The A-rated sound pressure level of the device measured in accordance with DIN 45635 Part1, Appendix D is:
Weighted sound pressure:
Vibration max.
These values were measured in accordance with the following standards: prEN 15503
This device has a radio interference suppression according to: EN 55014-1, EN55014-2
Please wear ear protectors!
Noise emission information in accordance with the German Equipment and Product Safety Act (GPSG) and the EC
Machine Directive: the noise pressure level at the place of work can exceed 80 dB(A). In such cases the operator
will require noise protection (e.g. wearing of ear protectors).
Impos 2510 (BVN 2500)
V~
230-240
Hz
50
W
2500
A
16
rpm
6.000-14.000
km/h
210
m
/ min.
11
3
l
45
kg
3,8
87 dB (A)
[K 3,0 dB(A)]
<3,96 m/s²
2
[K 1,5 m/s
]
GB-6
wise have the machine inspected by an authorised
customer service firm.
•
The shredder wheel is blocked: Check whether an
object has been sucked in that is too large; a piece of
wood, cardboard or other object has become jammed
between the impeller and shredder chamber. If the
shredder wheel remains blocked have the machine
inspected by an authorised customer service firm.
•
If the machine vibrates, please immediately stop us-
ing it. Have the machine inspected by an authorised
customer service firm.
Waste disposal and environmental protection
If your device should become useless somewhere in the
future or you do not need it any longer, do not dispose
of the device together with your domestic refuse, but dis-
pose of it in an environmentally friendly manner. Please
dispose of the device itself at an according collecting/
recycling point. By doing so, plastic and metal parts can
be separated and recycled. Information concerning the
disposal of materials and devices are available from your
local administration.
Spare parts
Collection bag
Service / Repair
Repairs to electric power tools should only be carried out
by specialist electrical personnnel.
Please contact your nearest Lagerhaus specialised
workshop.
You can find a Lagerhaus specialised workshop in your
vicinity in the Internet at „www.lagerhaus.at".
# 74200086
Werbung
Kapitel
Inhaltsverzeichnis
