Chorus GW 10 776 Bedienungsanleitung Seite 28

PROGRAMMING WITH THE EASY BASE UNIT
After creating the desired function, it is possible to set the device function parameters
from the "Application ¡ Parameters" menu.
The parameters available, in relation to the function created, are listed in the following
table.
The underlined value is the default value.
Function: scene
Parameter: scene number A - scene number B
1 activation of scene 1 (prolonged closure: memorising of the scene)
2 activation of scene 2 (prolonged closure: memorising of the scene)
3 activation of scene 3 (prolonged closure: memorising of the scene)
4 activation of scene 4 (prolonged closure: memorising of the scene)
5 activation of scene 5 (prolonged closure: memorising of the scene)
6 activation of scene 6 (prolonged closure: memorising of the scene)
7 activation of scene 7 (prolonged closure: memorising of the scene)
8 activation of scene 8 (prolonged closure: memorising of the scene)
Function: priority control
Parameter: priority control
Off/Up
On/Down
Function: dimming
Parameter: pushbutton function
up
down
Function: blinds
Parameter: pushbutton function
up
DOWN
Configuration parameters (Easy)
off and up priorities
on and down priorities
increases light intensity, on
decreases light intensity, OFF
raising of blinds, regulation of laths
lowering of blinds, regulation of laths
28