Operation - AIRFORCE F66A 90 TSE V6 Montage- Und Gebrauchsanweisungen

GB

OPERATION

TSE V6
A B C D E F
A. ON/OFF light key.
B. ON/OFF motor (6 speed) key: Touching the key, the fan will start at the same speed as when it was
turned off. Pressing keys "C" and "D", you can vary the suction speed (power). After 8 minutes of
continuous activity in 5th speed (first intensive phase) or after 7 minutes of continuous activity in
6th speed (second intensive phase), the fan automatically drops to 4th speed.
C. Decrease suction speed (power) key: Touching the key, the fan suction speed decreases.
D. Increase suction speed (power) key: Touching the key, the fan suction speed increases.
E. Timer key: Touching the key, whatever the suction speed selected, the timer function will start
with a duration of 10 minutes.
F. Reset filters key: Touching the key, the metal anti-grease filter saturation (1) and charcoal filter
replacement (2) warnings will be reset.
(1) After 40 hours of fan operation, the F and G symbols will flash in alternation, indicating the
need to clean the metal anti-grease filters.
(2) After 120 hours of fan operation, the F and C symbols will flash in alternation, indicating the
need to clean the active charcoal filters.
Sensor function: Touching lightly and simultaneously keys "C" and "D" will activate the sensor. In
this mode, the A symbol will appear and the suction speed will be calibrated automatically. To
return to manual operation, touch key "B", "C" or "D".
Note: 4 hours after the last key touch, the fan will automatically turn off.
50