Operation - AIRFORCE F100B 60 TSE Montage- Und Gebrauchsanweisungen

GB

OPERATION

TSE
A B C D E F
A: Light ON/OFF key: press this touch sensor to switch on or off the lights of the hood.
B: Motor ON/OFF key (4 speed): press this touch sensor to switch on the hood extractor fan at the same
speed as it was when last switched off. Use the „D" and „C" keys to vary the speed (power) of
extraction.
C: Decrease extraction speed (power) key: press this touch sensor to reduce the extraction speed of the
hood.
D: Increase extraction speed (power) key: press this touch sensor to increase the extraction speed of the
hood.
E: Timer key: irrespective of the extraction speed selected, touching the key will activate the timer
function for 5 minutes (during this phase a dot will flash on and off on the display). To reset the
timer operate the E motor key.
F: Filters reset key: touching this key will reset the metal anti-grease filter (1) saturation and carbon
filter replacement (2) warning. (1) After the hood has been operating for 40 hours, the "FG"or"G"
symbol on the display will begin to flash, indicating the need to clean the metal antigrease filters.
(2) After the hood has been operating for 120 hours, the "FC"or"C" symbol on the display will begin
to flash, indicating the need to clean the active carbon filters.
Automatic Sensor: tapping both "C" and "D" keys at the same time will activate the "Automatic Sensor"
function. This function, indicated with an "A" on the display, automatically sets the hood at the best
extraction speed, depending on the cooking going on. To return to manual operation, press "C" or
"D" button.
Note: 4 hours after the last key touch, the fan will automatically turn off.
All hoods with capacities exceeding 650 m3/h have the last timed speed; It lasts for 7 minutes,
after which it automatically returns to the last non-timed speed.
52