Icy Box IB-RD2252 Benutzerhandbuch Seite 26

http://www.icybox.de
Dual-Bay RAID Storage Enclosure
3.4.2 RAID Mode Setup
IB-RD2252:
In order to set the RAID mode, make sure the RAID switch is in the unlocked position.
• [RAID 1] Confi rm RAID 1 mirroring mode.
• [RAID 0->1] Change the mode from RAID 0 striping to RAID 1 mirroring.
• [RAID 0] Confi rm RAID 0 striping mode.
• [RAID 1->0] Change the mode from RAID 1 mirroring to RAID 0 striping.
Press the [OK] button to enter the setup menu and press the [Select] button to cycle through the
different options.
• T o exit the menu without changing any of the settings, press the [Select] button until you see the
Exit screen and then press the [OK] button.
• T o change the setting, press the [Select] button to choose your preferred mode, press the [OK]
button to select it, press the [OK] button again to confi rm the change and once more to acknow-
ledge that all data will be erased by this change. The device will restart automatically and after
start up, one more confi rmation is required to set the new RAID mode.
Note
Changing the RAID mode requires you to re-format the drives. Make sure to backup all existing data
fi rst!
IB-RD2252
25