Configuration - BeeWi BBZ251 Bedienungsanleitung

8

3.3. Configuration

The configuration menu can be accessed by
pressing the Tools key on the top left. There are
3 different options listed in the Settings:
- Touch Control: to enable the touch key mode
(Motion Control disabled)
- Language: to select your language
- About BeeWi
4. MAINTENANCE & CAUTIONS
4.1. Maintenance & other hints
- If vehicle does not respond, move closer to the vehicle and try again.
- If the vehicle loses power and moves slower, it may be necessary to
replace the batteries and to check the wheel mechanism for lint, thread,
hair or dust.
- To avoid damages, never drive the vehicle on a wet floor, on sand, or
in mud, rain or snow.
- Do not expose the vehicle to extreme temperatures.
- Remove the batteries from the vehicle when storing the product away.
- To protect the vehicle's wheel mechanism from lint, thread, hair, and dust
particles, you can use a small brush, tweezers or tie a small bit of cloth to
the tip of a toothpick, etc., and wipe off.
- Always keep vehicle clean, use a dampened cloth to wipe off, and then
wipe all the water off with a dry cloth. Never use chemicals to clean the
product.
- Avoid holding the wheels when rotating, this will cause the electronic
components to short circuit, overheat and cause malfunction.
ENGLISH