BeeWi BBZ251 Bedienungsanleitung Seite 7

7
3. USING THE CAR
3.1. Connection
If it has been previously paired, the car will automatically connect to the
iPhone® when it is powered on.
If this is not the case, you can also go to the iPhone® Bluetooth menu and
select the "BeeWi Red Mini Cooper S" device in your device list. Once
the status is "Connected", close the Bluetooth menu and get back to the
main screen.
3.2. Operation
Open the BeeWi Control Pad
application
The car will be connected
automatically and the control screen
below displayed. By default the
control is done with the orientation
sensor and the car is parked (P sign in
red on the top right of the screen).
Press P to exit the park mode and start
using the car.
- To move forward, move the iPhone®
downwards
- To move backward, move the
iPhone® upwards
- To turn left, turn the iPhone®
leftwards
- To turn right, turn the iPhone®
rightwards
You can also simply use the buttons
on the screen to control the car. To
do so, you need to select a different
controller as described below.
ENGLISH