p10_e_000_bookfile.book Page 19 Monday, December 15, 2003 11:51 AM
To print 3.5" × 5" Paper
When loading 3.5" × 5" Paper for printing, install the conversion tray to
the paper tray before inserting the paper.
Caution
Be careful not to stain or damage the conversion tray.
Do not touch the print surface (the blank,
glossy surface) when handling paper.
Do not store in a place subject to high
temperature, humidity or direct sunlight.
Do not leave paper in a place subject to excessive dust. Fingerprints or
dust on the print surface may degrade print quality.
To prevent malfunction, use only the specialty paper recommended for this
printer.
A maximum of 50 sheets of paper can be placed in the paper tray. Be
careful not to exceed this number when adding print paper. If too many print
paper sheets are loaded, the printer may jam.
To prevent paper from jamming, do not fold or bend print paper.
Do not write on paper before printing images on it. If you want to write
something, be sure to do so after printing, using an oil based ink. It is not
possible to print word processor or typewriter characters on this paper.
Conversion tray
Loading paper
19