Preparation; Connecting The Power Supply/Turning The Printer On And Off - Olympus CAMEDIA P-10 Bedienungsanleitung

p10_e_000_bookfile.book Page 14 Monday, December 15, 2003 11:51 AM

Preparation

Connecting the power supply/Turning the printer on and off

1
Plug the printer power cord into the AC adapter.
2
Plug the AC adapter power cord into a wall outlet, then plug the
other end of the printer power cord into the printer's DC-IN
terminal.
DC plug
3
Press the POWER button.
The POWER indicator lights, and the printer turns on.
Caution
If you are connecting to a digital camera, turn the printer on, connect the
digital camera to the printer, and then turn on the digital camera.
If you are connecting to a PC, connect to the PC, and then turn the printer
on before turning on the PC.
To turn off the printer
Press the POWER button to turn off the printer.
The POWER indicator goes out, and the printer turns off.
Caution
If the printer power cord is accidentally unplugged from the printer during
printing, turn the printer off, plug the printer power cord into the printer's
DC-IN terminal, and then turn the printer on again. Leaving the printer
unplugged in printing mode may cause it to malfunction.
14
P.21