Getting To Know Your Appliance; Safety Information; Appliance Description - Beurer Janosch JBY 40 Gebrauchsanleitung

1. Getting to know your appliance

Functions of the steam steriliser
This device allows you to sterilise the accessories that you use to feed your baby, as well as small toys that
can be scalded in accordance with the manufacturer's information, to reliably eradicate harmful bacteria.
The device is suitable for all conventional baby bottles with a maximum height of 155 mm and a maximum
diameter of 50 mm.
2. Proper use
Only use the device to sterilise baby bottles and small parts.
The device is only for private use and is not intended for medical or commercial purposes.
Any improper use can be dangerous.
This device is not intended for use by persons (including children) with restricted physical, sensory or men-
tal capabilities and/or by persons lacking the required understanding of the equipment and how it is used,
unless they are supervised by a person who is responsible for their safety or they are given instructions on
how to use the device.
Children should be supervised to ensure that they do not use the device as a toy.

3. Safety information

WARNING
• Keep children away from the packaging materials. Risk of suffocation.
• Do not use the "Grill" microwave function.
• Observe the required water volume and sterilisation time.
• Allow the device to cool down for approx. 2 minutes once the sterilisation time has elapsed, before carefully
removing it from the microwave. The steriliser will still be hot – risk of burns.
• Do not handle hot parts with your bare hands.
• Do not sterilise any electronic or metallic objects.
• The device must not come into contact with hot surfaces or sharp-edged objects.
• Before use, make sure that the device and accessories do not show any visible signs of damage.
• Do not use any attachments that are not recommended or offered as accessories by the manufacturer.
General notes
Should you have any questions concerning the use of our scale, please contact your dealer or customer
service.

4. Appliance description

4
1 Lid
2 Sterilisation container
1
3 Clips
6
4 Bottle stand
5 Tongs
6 Measuring jug
3
5
2
5. Start-up
Sterilise the device before first use.
• Clean the parts to be sterilised in a mild solution or in the dishwasher. Disassemble any assembled parts.
• Measure out 100 ml using the measuring jug and fill into the steriliser.
• Place the bottle stand into the sterilisation container.
5