Voice Recording - Philips 7655 Bedienungsanleitung

®
Do not remove the batteries during Recording. This may cause the
Voice Tracer to malfunction. If you intend to record for a
prolonged period of time, replace the batteries before beginning
recording.
®
Recording will stop automatically when no sound
is detected when the Voice Tracer is in VA mode
(Figure 6).
Deactivate the VA function when recording
important conversations.

Voice Recording

Set the desired recording, folder, VA function and speed (HQ, SP or
LP) before you start recording (see chapter "Menue").
Recording with the built-in microphone
1. Point the device's built-in microphone towards the
sound source.
2. Press the REC/PAUSE button to start recording.
The red LED will light (Figure 7 and 8).
3. Press the REC/PAUSE button to pause the
recording (Figure 9).
4. Press the REC/PAUSE button
again to continue the recording.
The red LED will light again.
5. Press the STOP/DEL button to
stop recording.
To record with an external microphone, connect the microphone to
the microphone socket and follow the same procedure as for the built-
in microphone.
Playback
Press and hold the PLAY/PAUSE/REMAIN button during normal
playback to display the remaining duration of the current file.
Figure 6
1. Press the FOLDER/REPEAT button to select the desired folder (A,
2. Press the PLAY/PAUSE/REMAIN button to start
3. Press the PLAY/PAUSE/REMAIN button again to
4. Press the PLAY/PAUSE/REMAIN button again to
Figure 7
5. Press the STOP/DEL button during Playback or
Figure 8 Figure 9
1. Normal Playback
B, C, or D).
If you do not select a folder, the last folder to which you recorded
will be played.
playback. The green LED will light and the
duration of the playback will be displayed (Figure
10 and 11).
pause playback.
resume playback.
Pause to stop playback.
Figure 10
Figure 11