MSA ULTIMA Series Schnellstartanleitung Seite 2

Calibrator
The Calibrator operation is very simple, by three-buttons to
perfom:
• a zero function,
• a zero and span calibration and
• displaying and changing the multiplex address of the
Gas Monitor.
Controller
The Controller allows the following operations to be performed
on an ULTIMA/ULTIMA X Gas Monitor:
• Set Monitor time and date
• Set the average interval
• Set/display span gas value
• Set/display alarms
• Display minimum, maximum, and average gas readings
• Enable calibration Output Signal
• Configure auto-calibration feature
• Display previous calibration date
• Set/display address
• Mimic Calibrator
• Set or display Range (ULTIMA X Series units only).
For detailed information please refer to the
ULTIMA/ULTIMA X Controller and Calibrator Manual.
GB
Order No.: 10083027/00