Goclever HCAMNAN2 Schnellstartanleitung Seite 8

GB
I want to connect the
device to the new
network, but it won't
work
I can't log in
I don't get any alerts
I cannot watch
Playback
I cannot change
settings of the
camera
I cannot see the
footage from the
camera that my
friend shared to me
The timeline of
Playback shows
incorrect time
The footage appears
blurry
7
Before connecting to new
network, first you should restart
the device by inserting a pin into
reset for several seconds.
Make sure you have already
created a valid account and
verified it properly with a code
obtained via email.
Check the settings of selected
camera, motion detection
sensitivity should be low/
medium/high.
No SD card inside or SD card
is broken or there is too little
footage to preview, try again
later.
Check if you are the owner of the
camera, you cannot change the
settings of the camera that is only
being shared to you.
The camera may be offline.
Check if your Internet connection
is stable and if your mobile device
time zone settings are correct.
Check if the lens are clean, you
can try to clean it with dry cloth.