Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Step 4
Put the billiard frame (29) with top side on the floor and place the legs (4)
into the corners of the billiard table (29). Screw them tighly by using screws
(15) and washers (16). Put into each leg (4) one height adjustable screw (28).
Turn the preassembled Billiard unit and place it on the legs.
Step 5
Put the preassembled Kicker unit onto the Billiard table. Place the ball
catcher (27) on each small side board (2) and secure with screws (14). Slide
the handgrip (21) as figure shows (with help from a little bit soap water) onto
the grip rods (17+18+19) and put on each opposite end a rod cap (22).
Step 6
The billiard table is the base table of all games. Instead of Kicker unit you
can insert the Speed Hockey/TT-Plate or the multi function board for Chess,
Bowling, Backgammon, Shuffleboard, Cards or Dices games. Before using
the table tennis game you have to place the net holder (51) into net holder
support (50) which are positioned in the middle of side edge. Then push the
net (44) with whit line on top position onto the net holder (51).
Checks
1. Check the orderly installation and function of all bolted and plug
connections. Installation is then complete.
Note:
Please keep the tool set, the puller and the instructions carefully,
because these may be required later for repairs or spare parts orders.
13
Werbung
