Operating The Walkie−Talkies; Display Illumination; Transmitting And Receiving - switel WTC519 Bedienungsanleitung

4 Operating the Walkie−Talkies
Display and notation of operating sequences
P
2 sec M
2 x M
a, P
b, P
on
ð

Display illumination

The display lights up for 4 seconds after pressing any button, ex-
cept the P button.
Switching the walkie−talkie on/off
a V
a V
Volume control
+ or ,

Transmitting and receiving

Transmitting
24
a P ð
Receiving
25
b, P
Operating the Walkie−Talkies
An acoustic signal is issued. The current channel setting
appears in the display.
Hold the walkie−talkie approx. 5 to 7 cm from your mouth
and speak at a normal volume. In order to talk to other sub-
scribers, the respective walkie−talkies must be set to the
same channel.
Radio signals cannot be received when the P button
is being pressed.
Press the button displayed
Press the button depicted for 2
seconds
Press the button displayed twice
Press and hold the button displayed
Release the button displayed
Text in the display
Speak into the microphone
23
Switch the walkie−talkie on
Switch the walkie−talkie off
Raise or lower the volume
Transmit
Receive
51