Karaoke Function - auna multimedia 10007061 Anschluss- Und Anwendungshinweise

OPERATION OF AMPLIFIER
Normal function
1. Be sure to switch off the power and to connect the outputs to corresponding input jacks.
2. Turn on the power and wait 3-4 seconds untill the speaker functions are connected.
3. Select audio source by pressing the INPUT key on the front panel or the AUX 1, AUX 2, AC-3/DVD,
MEDIA,FM on the remote control.
4. Adjust the VOLUME knob on the front panel or the VOL+/- key on the remote control to adjust the setting
of the main volume control to your listening level.
5. Press the MUSIC MENU key on the front panel or press the MUSIC MENU key on the remote control to
display TREBLE or BASS, then adjust the knob or press +/- to increase or decrease music treble/bass
effect
6. Press the MUSIC MENU key on the front panel or the MUSIC MENU key on the remote control. lt will
display FLV,FRV,SLV,SRV,CVOL,SWV,then adjust the knob or press+/- to change surround speakers,
centre speaker and subwoofer volume.
7. Press the MUTE key on the remote control to mute, press it again to reset.
TUNER APPLICATION
1. Before using the radio functions, you m ust attach the supplied antenna. Adjust the
antenna to obtain optimum reception.
2. Press the INPUT key on the front panel(amplifier)or on the remote control,to select "
TUNER " function.
3. Press the CH+/CH- key on the remote control to find radio bands that you have previously
listened to.
4. Press the TU+/TU- key on the remote control to adjust the radio frequency manually.
5. Press the AUTO key on the remote control, the machine will scan radio channels from
low-frequency to high-frequency by itself and memorize the channels one by one.
6. Press the MEMO key on the remote control and it will memorize the current radio frequency on
the band.The machine can memorize at most 40 FM radio bands.
7. In FM mode, press the STEREO/MONO key on the remote control to select Stereo or Mono.

KARAOKE FUNCTION

1. The machine can auto detect whether MIC1 or MIC2 is inserted.
2. Please turn off the microphone volume and adjust the volume gradually after inserting
the microphone.
3. Press MIC.MENU on the remote control to display MVOL, then press +/ - ,to change the
microphone volume.
4. Press MIC.MENU on the remote control to display MTRE or MBAS, then press +/ -, to
change the microphone tone.
5. Press MIC.MENU on the remote control to display ECHO, then press +/ -, to change the
microphone ECHO.
6. Note: Do not touch the top of the microphone when singing in oder to avoid howling
effect. Adjust the microphone volume gradually to avoid howling effect.
USB READER FUNCTION
This unit have two USB jacks, Press the USB key you can insert a USB DISC or a Mp3 Player with USB
Interface to play the Mp3 music .
NOTE:
1. When using USB function. Please do not insert in the wrong direction, or it will be corrupted.
2. When using USB function. lt is preferable if it is on 5.1CH MODE.
3. Pleasure use external power for the mobile hard disc when connect to USB port.
OPERATION OF AMPLIFIER