Werbung
Verfügbare Sprachen
Verfügbare Sprachen
We hereby confirm that the following device
PowerVX Full Color Laser Systems
complies with the essential safety requirements, laid down in the regulations of
the committee to assimilate the provisions of law of all participating EU states
on the electromagnetic compatibility (89/446/EWG).
The device has been classified considering the following EU-norms on
electromagnetic compatibility:
IEC 801 Part 3; VDE 0843 Part 3
IEC 801 Part 4; VDE 0843 Part 4
IEC 801 Part 2; VDE 0843 Part 2
DIN EN 55011B; VDE 0875 Part 11
DIN EN 60555-2: 1987
DIN EN 60555-3: 1987
Furthermore, the device is verified in correspondence to the laser class
regulations DIN EN 60825-1, if properly set up according to the upper
mentioned laser safety regulation.
All PowerVX projectors are : Laser class 4
After installing the device, an inspection and official approval is indispensable
for the overall setup. The inspection must follow the european guidelines EN
60825-1 and corresponding regulations for the prevention of accidents BGV-B2.
This declaration is executed on behalf of the PowerVX manufacturer
MediaLas Laserproducts GmbH
Hoelzlestr. 13
D-72336 Balingen
Represented by
Dirk Baur
President
Balingen, 01.10.2009
12
Werbung
