Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Adjusting projection size
Just next to the ILDA connector, you will find projection size adjustments, and mirror
switches, to mirror each projection axis in case of rear projection, or upside down mounting.
The functions are self explaining.
Connecting to power
The internal power supplies are multi voltage switching power supplies, and will adapt to
almost any power source on the planet. Use a standard power cord. No switching is necessary.
For US countries, or other countries with low AC voltage, a different fuse might be necessary.
In this case, replace the 2A fuse with a 4A type.
Scanfail safety circuit
All PowerVX projectors are equipped with a fast scanfail safety device. It monitors the galvo
movements, and shuts off laser beams within a very short time, if a scanfail is detected, or if
both galvos stand still without movement. It cannot protect incorrect or dangerous show
programming.
11
Werbung
