Assembly Twinning Set To The Backpack; Technical Information - METALSUB TWINNINGSET Montageanleitung

5 5 5 3
Assembly twinning set to the backpack (Fig. 7,8)
The backpack with the fitted backpack holder can be attached to the diving set
with the mounted twinning plate quickly, firmly and easily.
The twinning plate has two raised ridges that provide a precise fit with the
recesses in the backpack holder.
The top recess of the backpack holder has a safely lock that can be operated
in a simple manner by way of a springloaded pressure pin.
1. First fit the bottom ridge into the bottom recess.
2. Push the pressure pin in completely and push the top ridge into the top
recess.
3. Release the pin. It has a groove on it that once the pin has been released
has to be completely visible.
4. Push the safety spring over the groove in the pin.
Figure 7.

TECHNICAL INFORMATION

- Material: All aluminium parts are anodised in accordance with American
Military Standard MIL-A-8625-E type 3 class 2. Also the coating is
impregnated with Teflon.
- Weight above water: approx. 2,2 kg.
- Weight under water: approx. 1,5 kg.
8
Figure 8.
.