Troubleshooting - TFA Palma Bedienungsanleitung

TFA_No. 30.3067_Anleitung
PALMA – Wireless pool thermometer
• You can also start the search for the transmitter manually. Choose
with the CH button on the base station the corresponding channel
and press und hold the CH button for three seconds. "- - ,- °C"
appears on the lower display. The reception symbol for the transmit-
ter flashes.
• Press the CH button on the base station to display sequentially the
outdoor values for the desired transmitters. Press the CH button
again after the last registered channel and a circle symbol will
appear. On the lower display the values of the installed transmitters
are displayed in sequence. To deactivate the function press the CH
button again.
• With the MAX/MIN button you can recall the highest and lowest tem-
perature values for all installed transmitters.
10. Care and maintenance
• Clean the devices with a soft damp cloth. Do not use solvents or
scouring agents.
• Remove the batteries if you do not use the devices for a long period
of time.
10.1 Battery replacement
• Change the base station batteries, when the battery symbol appears
on the display of the indoor temperature.
• Change the batteries of the pool sensor, when the battery symbol
appears on the lower display next to the pool temperature.
• Please note:
When the batteries are changed, the contact between the transmitter
and the base station must be restored – so always insert new batter-
ies into both devices or start the manual search for the transmitter.

11. Troubleshooting

Problem
No indication on
the base station/
pool sensor
22
21.12.2018 11:45 Uhr
Solution
➜ Ensure the batteries' polarities are
correct
➜ Change the batteries
Seite 12
PALMA – Wireless pool thermometer
No reception
of the pool sensor
Display "---"
Incorrect display
on the base station
Incorrect display
on pool sensor
immediately after assembly
Indication: LL.L / HH.H
If your device fails to work despite these measures, contact the retailer
where you purchased the product.
12. Waste disposal
This product has been manufactured using high-grade materials and
components which can be recycled and reused.
Never dispose of empty batteries and rechargeable batter-
ies with ordinary household waste.
As a consumer, you are required by law to take them to
your retail store or to an appropriate collection site
depending on national or local regulations in order to pro-
tect the environment.
The symbols for the contained heavy metals are:
Cd = cadmium, Hg = mercury, Pb = lead
➜ No pool sensor installed
➜ Check the batteries of pool sensor
(do not use rechargeable batteries!)
➜ Restart the pool sensor and the base
station according to the manual
➜ Start the manual search for the pool
sensor: Press and hold the CH button
on the base station
➜ Choose another place for the base
station
➜ Reduce the distance between the
pool sensor and the base station
➜ Check if there is any source of inter-
ference
➜ Change the batteries
➜ Wait a few minutes
➜ Outside measuring range
23