Korg TMR-50 Bedienungsanleitung Seite 20

to the tempo also.
4.
If you want to change the time signature,
press the BEAT p, q buttons to make
your selection.
The time signature will change as follows.
Press the BEAT p, q buttons:
9 (9 beats) (Duplet)
n
(Triplet without the center beat)
(Quadruplet)
n
the center beat)
n
5.
Play along with the metronome tempo.
6.
To stop the metronome, press the START/
STOP button.
Using tap tempo
The tap tempo that you input will be displayed
as a BPM (Beats Per Minute) value.
1.
Press the METRONOME ON button.
The pendulum of the metronome will ap-
pear on the display and "
will appear above.
20
0
n n
(Triplet)
n
n
(Quadruplet without
0 ...
2.
Press the TAP TEMPO button several
times at regular intervals at the tempo
that you want.
The TMR-50 detects the interval used when
pressing the button and displays it as a
BPM (Beats Per Minute) value, and sets
1 ...
it as the tempo.
n
While the tempo is detected, " " will
appear on the display.
When the BPM detected by the tap tempo
is less than 30, "Lo" will appear on the
display and the tempo will be set at "30."
If the BPM detected by the tap tempo
exceeds 252, "Hi" will appear on the
display and the tempo will be set at "252."
3.
Press the START/STOP button to start
the metronome.
The metronome pendulum will swing from
left to right according to the tempo and the
TAP TEMPO button will blink accordingly.
"